|
1. Sector : Non Classified
Supply Of Angle Needle Valve
|
Value :
KRW 48.60 Lac
*
|
KRW 4.86 Mn
*
|
Due Date :
1 Day to go
|
29/04/2024
|
|
TID :71576600
Korea
|
|
|
|
2. Sector : Non Classified
Angle Needle Valve (25a*1500
|
Value :
KRW 47.06 Lac
*
|
KRW 4.70 Mn
*
|
Due Date :
1 Day to go
|
29/04/2024
|
|
TID :71525003
Korea
|
|
|
3. Sector : Security Services
Supply of Flanges 1 3 8 Ods, Needle Valve, Capscrew Socket Head M16x2.0x50mm, Gauge Oil Pressure, Bearing Cap, Starter for He D2 2.2kw Dol, Thermo Regulating Valve, Defrosting Control Sensor, Feeler Pocked, Power Contactor 115 Vac, Air Contactor, High and Low Pressure Relay P78, Room Thermostat, Nipple with Coupling, Oil Filter Cartridge, Power Contactor 115vac, Xjf 151 N New Screw Compressor, Extension, Gasket for Capacitor, Purging Valve, Slide Valve Indicating Mechanism (microprocessor), Piston Stepper, Cover Seal Housing, Coolant Water Pump Shaft Packing, Shutoff Valve, Relay, Capscrew Socket Head M12x1.25 X40mm, Discharge Line Thermometer 0 120 C, Piston Slide Valve, Heat Exchanger, Anti Freeze Thermostat, Thermometer, Shaft Seal Chilled Water Pump, Plug High Vi Liquide Injection, Jackshaft, Timing Relay 115v 2w, Chock Mount, Oil Difference Pressure Switch, Crank Shaft, Glas, Bearing, Capscrew Hex Head M24x3.0 X65mm, Temperature Sensor of a Cooling Room, Capscrew Socket Head M8x30
Qty 746
|
Value :
0
*
|
Refer Document
*
|
Due Date :
5 Days to go
|
03/05/2024
|
|
TID :70380866
Maharashtra
|
|
|
|
|
|
|
|
6. Sector : Non Classified
Supply Of Needle Heaters
|
Value :
0
*
|
Refer Document
*
|
Due Date :
262 Days to go
|
15/01/2025
|
|
TID :70475571
Spain
|
|
|
7. Sector : Railways Transport Services
Supply of calibration gas mixture in 0.5 ltr w/c aluminium canister along with fine control needle valve methane=100ppm, ethane=1000ppm, ethylene=1000ppm, acetylene=1000ppm, hydrogen=1000ppm, carbon dioxide=5000ppm, carbon monoxide=5000ppm, nitrogen balance filling pressure-20kg/sq.cm make-chemtron/upg/span can/ags note 1) the gas canister no. should be punched clearly on the cylinder and should contain pressure gauge on the canister to show internal pressure of the canister., (2) calibration certificate should be given by any govt. accredited laboratory and canister no. should be mentioned on the calibration certificate.
calibration gas mixture in 0.5 ltr w/c aluminium canister along with fine control needle valve methane=100ppm, ethane=1000ppm, ethylene=1000ppm, acetylene=1000ppm, hydrogen=1000ppm, carbon dioxide=5000ppm, carbon monoxide=5000ppm, nitrogen balance filling pressure-20kg/sq.cm make-chemtron/upg/span can/ags note 1) the gas canister no. should be punched clearly on the cylinder and should contain pressure gauge on the canister to show internal pressure of the canister., (2) calibration certificate should be given by any govt. accredited laboratory and canister no. should be mentioned on the calibration certificate. [ warranty period 30 months after thedate of delivery ]
|
Value :
0
*
|
Refer Document
*
|
Due Date :
17 Days to go
|
15/05/2024
|
|
TID :70726388
Orissa (Odisha)
|
|
|
|
|